We now accept purchase orders on terms. Contact our sales team for approval learn more

(800)504-7199 United States
(+01)201-526-9500

Your cart is empty

Cisco AIM-ATM-1T1
Actual item may differ from photo shown. UsedCisco.com does not sell or include licensed software of any kind. All products are tested and reset to factory defaults.

Guaranteed Pre-Owned

Limited Availability

Get the latest availability info:

Extend Your Warranty

Available
Available
Available
List Price: $2,000.00
Our Price: Call us at (800)-504-7199
Average Rating :
N/A
This product has not yet been reviewed.

This item may qualify for Free Super Saver Shipping!

MFG PART #:

AIM-ATM-1T1

UC SKU #:

1137

Questions? Post your question instantly!

I need to buy this product!

Loadinganimation

Should we email you when a response is posted?

The AIM-ATM optimizes the Cisco 2600, 2600XM, 2691, 3660, and Cisco 3700 Series modular multiservice routers by offering ATM adaptation layer 2 (AAL2) and ATM adaptation layer 5 (AAL5) support for low-density T1/E1 data and voice connections over ATM networks. This AIM module allows service providers and enterprise customers to take advantage of the reliability and quality of service (QoS) available with ATM connectivity.

Cisco AIM-ATM-1T1 Environmental Conditions

Temperature: 32 degrees F (0.0 degrees C) to 104 degrees F (40.0 degrees C) Operating
Humidity: 10% to 85% Non-condensing Relative Humidity Storage
Humidity: 10% to 85% Non-condensing Relative Humidity Operating

Cisco AIM-ATM-1T1 Physical Characteristics

Dimensions: 0.25 Height x 3.25 Width x 5.25 Depth
Shipping Dimensions: 2 Height x 9.25 Width x 12 Depth
Shipping Weight: 1.25 lb

Cisco AIM-ATM-1T1 Miscellaneous

Certifications & Standards: Supports Industry Standards:
  • Medium complexity Codec types of G.711 a-law, G.711 u-law, G.726-32K, G.726-24K, G.726-16K, G.729A, G.729AB are all supported
  • High complexity Codec types of G.723.1 (all variations) G.728, G.729, G.729B and GSM-FR are supported
  • ATM standards such as AAL2, AAL5, UNI 3.0, UNI 3.1, and UNI 4.0 are supported

    Safety:
  • UL 60950 3rd Edition
  • CAN/CSA C22.2 No. 60950-00 3rd Edition
  • IEC 60950:1999, EN 60950:2000
  • AS/NZS 3260: 1993 with Amendments 1, 2, 3, and 4
  • TS001: 1996 with Amendment 1

    EMI/EMC:
  • Emissions:
  • 47CFR15 Class A (FCC)
  • CISPR22 Class A
  • EN55022 Class A
  • AS/NZS 3548 Class A (ACA)
  • ICES003 Class A (Industry Canada)
  • V-3 Class A (VCCI)
  • CNS13438 Class A (BSMI)
  • EN61000-3-2
  • EN61000-3-3
  • EN300386 Class A

    Immunity:
  • EN50024
  • EN50082-1
  • EN61000-6-1 (including EN 61000 4-2 Electrostatic Discharge; EN 61000 4-3 Radiated Susceptibility; EN 61000 4-4 Electrical Fast Transients; EN 61000 4-5 Power & Signal Line Surges; EN 61000 4-6 Injected RF Swept Immunity; EN61000-4-11 Voltage Dips + Sags)
  • EN300386

    Post Telephone & Telegraph (PTT):
  • This equipment complies with all the regulatory requirements for connection to the communications networks of each country in which it is sold
  • Cisco AIM-ATM-1T1 Original Manufacturer Warranty

    Standard Warranty: 90 Day Limited

    Cisco AIM-ATM-1T1 Miscellaneous

    Additional Information:
    • Maximum number of ATM T1/E1s supported: Up to 4 ATM T1/E1's per AIM-ATM
    • Required Cisco IOS Image: Any Cisco IOS Plus Feature Sets

      Item Included:
    • High Performance ATM Advanced Integration Module (AIM-ATM)
    • 1-Port RJ-48 Multiflex Trunk - T1 (VWIC-1MFT-T1)

      The AIM-ATM supports the following ATM services:
    • Supports up to four ATM T1/E1 ports per AIM, using two 2-port multiflex T1/E1 VWICs in WIC slots, NM-xFE2W, NM-2W, or NM-HDV
    • ATM class of service (CoS) features CBR, VBR-nrt, VBR-rt, ABR, and UBR
    • AAL5: H.323 VoIP, up to four T1/E1 channels of AAL5 (with IMA support)
    • VoATM-AAL2 (trunked only)
    • Supports QoS features: Low-Latency Queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), per-virtual circuit queuing, pre-ATM VC shaping for non - real-time variable bit rate (VBR-nrt), Resource Reservation Protocol (RSVP), IP CoS map to ATM QoS services, CRTP (over Point-to-Point/Multilink over ATM)
    • Permanent virtual circuit (PVC) and switched virtual circuits (SVC) support, where SVC is for data only
    • ATM Forum UNI 3.0, UNI 3.1, and UNI 4.0
    • LAN Emulation 2.0 Client and Server
    • Per VC queuing for segmentation
    • Support for up to 1024 AAL5 VCs for data/voice features
    • Support for up to1024 AAL2 VCs with up to 255 subchannels each for voice per AIM
    • Network clock management support, which allows synchronization between the ATM network and PBX/Public Switched Telephone Network (PSTN)
    • 1-Kbps resolution for sustained cell rate (SCR) and peak cell rate (PCR)
    • 32-Kbps minimum traffic rate
    • 13-bit range for VPI/VCI per interface
    • Maximum Burst Size (MBS) is up to 255 cells per VC
    • Dynamic management of the cell scheduler table
    • Operations and management (OAM) support (F5)
    • Early Packet Discard
    • AAL5 reassembly time-outs
    • AAL2 subcell multiplexing support
    • RFC 1483 support for multiple encapsulations over ATM
    • RFC 1577 support for routing over ATM
    • Multiprotocol routing over ATM (MPOA) client and server
    • IETF PPP over ATM
    • Next Hop Resolution Protocol (NHRP)
    • ILMI 4.0
    • IMA 1.1 Support
    • Maximum number of ATM T1/E1s supported: Up to 4 ATM T1/E1's per AIM-ATM
    • Required Cisco IOS Image: Any Cisco IOS Plus Feature Sets

      Item Included:
    • High Performance ATM Advanced Integration Module (AIM-ATM)
    • 1-Port RJ-48 Multiflex Trunk - T1 (VWIC-1MFT-T1)

      The AIM-ATM supports the following ATM services:
    • Supports up to four ATM T1/E1 ports per AIM, using two 2-port multiflex T1/E1 VWICs in WIC slots, NM-xFE2W, NM-2W, or NM-HDV
    • ATM class of service (CoS) features CBR, VBR-nrt, VBR-rt, ABR, and UBR
    • AAL5: H.323 VoIP, up to four T1/E1 channels of AAL5 (with IMA support)
    • VoATM-AAL2 (trunked only)
    • Supports QoS features: Low-Latency Queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), per-virtual circuit queuing, pre-ATM VC shaping for non - real-time variable bit rate (VBR-nrt), Resource Reservation Protocol (RSVP), IP CoS map to ATM QoS services, CRTP (over Point-to-Point/Multilink over ATM)
    • Permanent virtual circuit (PVC) and switched virtual circuits (SVC) support, where SVC is for data only
    • ATM Forum UNI 3.0, UNI 3.1, and UNI 4.0
    • LAN Emulation 2.0 Client and Server
    • Per VC queuing for segmentation
    • Support for up to 1024 AAL5 VCs for data/voice features
    • Support for up to1024 AAL2 VCs with up to 255 subchannels each for voice per AIM
    • Network clock management support, which allows synchronization between the ATM network and PBX/Public Switched Telephone Network (PSTN)
    • 1-Kbps resolution for sustained cell rate (SCR) and peak cell rate (PCR)
    • 32-Kbps minimum traffic rate
    • 13-bit range for VPI/VCI per interface
    • Maximum Burst Size (MBS) is up to 255 cells per VC
    • Dynamic management of the cell scheduler table
    • Operations and management (OAM) support (F5)
    • Early Packet Discard
    • AAL5 reassembly time-outs
    • AAL2 subcell multiplexing support
    • RFC 1483 support for multiple encapsulations over ATM
    • RFC 1577 support for routing over ATM
    • Multiprotocol routing over ATM (MPOA) client and server
    • IETF PPP over ATM
    • Next Hop Resolution Protocol (NHRP)
    • ILMI 4.0
    • IMA 1.1 Support
    System Requirements: Minimum Cisco IOS Release required:
  • Cisco 2600 Series, 3660: 12.2(2)XA/12.2.4T
  • Cisco 2600XM Series: 12.2.8T1
  • Cisco 2691, 3700 Series: 12.2(11)YT and 12.2(13)T

    Hardware Prerequisites:
  • Cisco 2600 and 2600XM:
    - Available AIM slot
    - VWIC-MFT for WAN, PSTN or PBX connections
  • Cisco 3660:
    - MIX module and available AIM slots
    - VWIC-MFT in a NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W, or NM-HDV
  • Cisco 2691, 3700:
    - Available AIM slot
    - VWIC-MFT in a chassis WIC slot or in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W, or NM-HDV
  • Compatibility:
    • Cisco 2610-2613
    • Cisco 2620
    • Cisco 2621
    • Cisco 2650
    • Cisco 2651
    • Cisco 2610XM
    • Cisco 2611XM
    • Cisco 2620XM
    • Cisco 2621XM
    • Cisco 2650XM
    • Cisco 2651XM
    • Cisco 2691
    • Cisco 3661
    • Cisco 3662
    • Cisco 3725
    • Cisco 3745
    • Cisco 2610-2613
    • Cisco 2620
    • Cisco 2621
    • Cisco 2650
    • Cisco 2651
    • Cisco 2610XM
    • Cisco 2611XM
    • Cisco 2620XM
    • Cisco 2621XM
    • Cisco 2650XM
    • Cisco 2651XM
    • Cisco 2691
    • Cisco 3661
    • Cisco 3662
    • Cisco 3725
    • Cisco 3745

    Cisco AIM-ATM-1T1 General Information

    Manufacturer: Cisco Systems, Inc
    Brand Name: Cisco
    Product Name: Advanced Integration Module
    Product Type: Advanced Integration Module

    Cisco AIM-ATM-1T1 Interfaces/Ports

    Interfaces/Ports: 1 x T1 WAN
    Interfaces/Ports Details: 1 x RJ-48 T1 WAN

    Cisco AIM-ATM-1T1 Media & Performance

    Connectivity Media: Not Applicable
    Data Transfer Rate: Not Applicable

    Cisco AIM-ATM-1T1 Management & Protocols

    Protocols: ATM
    Protocols: NHRP
    Protocols: VoIP
    Protocols: PPPoA

    Cisco AIM-ATM-1T1 Environmental Conditions

    Temperature: -4 degrees F (-20.0 degrees C) to 149 degrees F (65.0 degrees C) Storage