(800)504-7199 United States
(+01)201-526-9500

Your cart is empty

Cisco NM-HDV2
Actual item may differ from photo shown. UsedCisco.com does not sell or include licensed software of any kind. All products are tested and reset to factory defaults.

Guaranteed Pre-Owned

what's this?

In stock & ready to ship

Extend Your Warranty

Free
$42.74
$85.47
List Price: $1,495.00
You Save: (71%) $1,067.65
Current Price: $427.35
Quantity

This item may qualify for Free Super Saver Shipping!

MFG PART #:

NM-HDV2

UC SKU #:

67850

Questions? Post your question instantly!

I need to buy this product!

Loadinganimation

Should we email you when a response is posted?

Network modules provide enterprises, managed service providers, and service providers with the ability to directly connect the public switched telephone network (PSTN), traditional telephony equipment such as private branch exchange (PBX), key systems, analog telephones, and fax machines.

Supports a VIC/VWIC slot that can be populated with either digital or analog/BRI voice/WAN interface card. Supports a maximum of 60 channels of digital voice, or four channels of analog voice in medium complexity codec. Must be used with up to four PVDM2 Packet Fax/Voice DSP modules.

Cisco NM-HDV2 Miscellaneous

Certifications & Standards:
  • FCC Class B device

    • United States:

  • EMC 47CFR15 Subpart B 2002, T1
  • Safety IEC60950
  • Telecom 47 CFR part 68, TIA/EIA 968-A

    • Canada:

  • EMC CISPR22 or FCC Part 15
  • Safety IEC60950
  • Telecom CS-03

    • European Community CECountries:

  • EMC EN55022/EN50082/EN61000
  • Safety EN60950
  • Telecom TBR4, TBR12 and TBR13

  • FCC Class B device

    • United States:

  • EMC 47CFR15 Subpart B 2002, T1
  • Safety IEC60950
  • Telecom 47 CFR part 68, TIA/EIA 968-A

    • Canada:

  • EMC CISPR22 or FCC Part 15
  • Safety IEC60950
  • Telecom CS-03

    • European Community CECountries:

  • EMC EN55022/EN50082/EN61000
  • Safety EN60950
  • Telecom TBR4, TBR12 and TBR13

Cisco NM-HDV2 Original Manufacturer Warranty

Standard Warranty: 90 Day Limited

Cisco NM-HDV2 General Information

Manufacturer: Cisco Systems, Inc
Brand Name: Cisco
Product Name: IP Communications High-Density Digital Voice/Fax Network Module
Product Type: Network Module

Cisco NM-HDV2 Interfaces/Ports

Interfaces/Ports: Not Applicable
Interfaces/Ports Details: Not Applicable

Cisco NM-HDV2 I/O Expansions

Expansion Slots: 1 x VIC/VWIC
Expansion Slots: 4 x PVDM
Daughter Cards: Not Included

Cisco NM-HDV2 Management & Protocols

Management:
  • Cisco Voice Manager
  • SNMP protocol compliant
  • Manageable via a MIB browser
  • CiscoView interface for configuration
  • ConfigMaker
  • NetSys supported
  • Cisco Voice Manager
  • SNMP protocol compliant
  • Manageable via a MIB browser
  • CiscoView interface for configuration
  • ConfigMaker
  • NetSys supported
Protocols: SNMP
Protocols: VoATM
Protocols: MGCP
Protocols: VoFR
Protocols: VoIP
Protocols: SIP

Cisco NM-HDV2 Controls/Indicators

Status Indicators:
  • EN
  • PVDM 0
  • PVDM 1
  • PVDM 2
  • PVDM 3
  • EN
  • PVDM 0
  • PVDM 1
  • PVDM 2
  • PVDM 3

Cisco NM-HDV2 Environmental Conditions

Temperature: -25 degrees C (-13.0 degrees F) to 70 degrees C (158.0 degrees F) Storage
Temperature: 0 degrees C (32.0 degrees F) to 40 degrees C (104.0 degrees F) Operating
Humidity: 5% to 95% Non-condensing Relative Humidity Non-operating
Humidity: 5% to 85% Non-condensing Relative Humidity Operating

Cisco NM-HDV2 Miscellaneous

Additional Information:
  • Network module contain four 80-pin SIMM sockets for PVDM2s
  • Toll Bypass Support
  • Telephony Interface Signaling Support
  • Cisco SRST maintains basic telephony services at the branch office even if Wan gCEs down
  • This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls
  • Supports a maximum of 60 channels of digital voice, or four channels of analog voice in medium complexity codec
  • The module is Interoperable with the full range of Cisco IP Communications solutions
  • Supports FXS, FXO (includes CAMA), DID, E/M, BRI (S/T), T1, E1, and J1 interfaces

    • Modular Router Solutions:

  • Voice & Fax Integration

  • Network module contain four 80-pin SIMM sockets for PVDM2s
  • Toll Bypass Support
  • Telephony Interface Signaling Support
  • Cisco SRST maintains basic telephony services at the branch office even if Wan gCEs down
  • This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls
  • Supports a maximum of 60 channels of digital voice, or four channels of analog voice in medium complexity codec
  • The module is Interoperable with the full range of Cisco IP Communications solutions
  • Supports FXS, FXO (includes CAMA), DID, E/M, BRI (S/T), T1, E1, and J1 interfaces

    • Modular Router Solutions:

  • Voice & Fax Integration
System Requirements:
  • 80-pin SIMM sockets for PVDM2

    • Software and Memory Requirements:

  • Cisco 2600XM:
    • 12.3(7)T
    • 12.3(8)T for conferencing/transcoding
    • IP Plus images and higher
    • 64 MB DRAM
    • 32 MB Flash
  • Cisco 2691:
    • 12.3(7)T
    • 12.3(8)T for conferencing/transcoding
    • IP Plus images and higher
    • 128 MB DRAM
    • 32 MB Flash
  • Cisco 3700:
    • 12.3(7)T
    • 12.3(8)T for conferencing/transcoding
    • IP Plus images and higher
    • 128 MB DRAM
    • 32 MB Flash
  • Cisco 2811, 2821, 2851:
    • 12.3(8)T4
    • IP Plus images and higher
    • 256 MB DRAM
    • 64 MB Flash
  • Cisco 3825:
    • 12.3(8)T4
    • IP Plus images and higher
    • 256 MB DRAM
    • 64 MB Flash
  • Cisco 3845:
    • 12.3(8)T4
    • IP Plus images and higher
    • 256 MB DRAM
    • 64 MB Flash

    Supported Platforms & Minimum IOS Versions:

  • 3845 - 12.3(11)T
  • 3825 - 12.3(11)T
  • 3745 - 12.3(7)T
  • 3725 - 12.3(7)T
  • 2691 - 12.3(7)T
  • 2600XM Series - 12.3(7)T
  • 2811 - 12.3(8)T4
  • 2821 - 12.3(8)T4
  • 2851 - 12.3(8)T4

  • 80-pin SIMM sockets for PVDM2

    • Software and Memory Requirements:

  • Cisco 2600XM:
    • 12.3(7)T
    • 12.3(8)T for conferencing/transcoding
    • IP Plus images and higher
    • 64 MB DRAM
    • 32 MB Flash
  • Cisco 2691:
    • 12.3(7)T
    • 12.3(8)T for conferencing/transcoding
    • IP Plus images and higher
    • 128 MB DRAM
    • 32 MB Flash
  • Cisco 3700:
    • 12.3(7)T
    • 12.3(8)T for conferencing/transcoding
    • IP Plus images and higher
    • 128 MB DRAM
    • 32 MB Flash
  • Cisco 2811, 2821, 2851:
    • 12.3(8)T4
    • IP Plus images and higher
    • 256 MB DRAM
    • 64 MB Flash
  • Cisco 3825:
    • 12.3(8)T4
    • IP Plus images and higher
    • 256 MB DRAM
    • 64 MB Flash
  • Cisco 3845:
    • 12.3(8)T4
    • IP Plus images and higher
    • 256 MB DRAM
    • 64 MB Flash

    Supported Platforms & Minimum IOS Versions:

  • 3845 - 12.3(11)T
  • 3825 - 12.3(11)T
  • 3745 - 12.3(7)T
  • 3725 - 12.3(7)T
  • 2691 - 12.3(7)T
  • 2600XM Series - 12.3(7)T
  • 2811 - 12.3(8)T4
  • 2821 - 12.3(8)T4
  • 2851 - 12.3(8)T4
Compatibility:

Supported Platforms:

  • 3845
  • 3825
  • 3745
  • 3725
  • 2691
  • 2600XM Series
  • 2811
  • 2821
  • 2851

    		•