(800)504-7199 United States
(+01)201-526-9500

Your cart is empty

Cisco NM-HDV2-2T1/E1
Actual item may differ from photo shown. UsedCisco.com does not sell or include licensed software of any kind. All products are tested and reset to factory defaults.

Guaranteed Pre-Owned

what's this?

In stock & ready to ship

Extend Your Warranty

Free
$71.98
$143.95
Current Price: $719.75
Quantity

This item may qualify for Free Super Saver Shipping!

MFG PART #:

NM-HDV2-2T1/E1

UC SKU #:

67863

Questions? Post your question instantly!

I need to buy this product!

Loadinganimation

Should we email you when a response is posted?

Network modules provide enterprises, managed service providers, and service providers with the ability to directly connect the public switched telephone network (PSTN), traditional telephony equipment (such as private branch exchange (PBX), key systems, analog telephones, and fax machines.

This Module includes two built-in T1/E1 ports and a VIC/VWIC slot that can be fitted with either digital or analog/BRI voice/WAN interface cards. Supports a maximum of 120 channels of digital voice, or 60 channels of digital voice and four channels of analog voice in medium complexity codec. Must be used with up to four PVDM2 Packet Fax/Voice DSP modules.

Cisco NM-HDV2-2T1/E1 General Information

Manufacturer: Cisco Systems, Inc
Brand Name: Cisco
Product Name: IP Communications High-Density Digital Voice/Fax Network Module
Product Type: Network Module

Cisco NM-HDV2-2T1/E1 Interfaces/Ports

Interfaces/Ports: 2 x T1/E1 WAN
Interfaces/Ports Details: 2 x T1/E1 WAN

Cisco NM-HDV2-2T1/E1 Media & Performance

Data Transfer Rate: 2.048Mbps E1
Data Transfer Rate: 1.544Mbps T1

Cisco NM-HDV2-2T1/E1 I/O Expansions

Expansion Slots: 1 x VIC/VWIC
Daughter Cards: Not Included

Cisco NM-HDV2-2T1/E1 Management & Protocols

Management:
  • Cisco Voice Manager
  • SNMP protocol compliant
  • Manageable via a MIB browser
  • CiscoView interface for configuration
  • ConfigMaker
  • NetSys supported
  • Cisco Voice Manager
  • SNMP protocol compliant
  • Manageable via a MIB browser
  • CiscoView interface for configuration
  • ConfigMaker
  • NetSys supported
Protocols: SIP
Protocols: SNMP
Protocols: VoIP
Protocols: VoFR
Protocols: VoATM
Protocols: MGCP

Cisco NM-HDV2-2T1/E1 Controls/Indicators

Status Indicators:
  • AL
  • LP
  • CD
  • EN
  • PVDM 0
  • PVDM 1
  • PVDM 2
  • PVDM 3
  • AL
  • LP
  • CD
  • EN
  • PVDM 0
  • PVDM 1
  • PVDM 2
  • PVDM 3

Cisco NM-HDV2-2T1/E1 Environmental Conditions

Temperature: -25 degrees C (-13.0 degrees F) to 70 degrees C (158.0 degrees F) Storage
Temperature: 0 degrees C (32.0 degrees F) to 40 degrees C (104.0 degrees F) Operating
Humidity: 5% to 95% Non-condensing Relative Humidity Non-operating
Humidity: 5% to 85% Non-condensing Relative Humidity Operating

Cisco NM-HDV2-2T1/E1 Miscellaneous

Additional Information:
  • Network module contain four 80-pin SIMM sockets for PVDM2s
  • Toll Bypass Support
  • Telephony Interface Signaling Support
  • Cisco SRST maintains basic telephony services at the branch office even if Wan gCEs down
  • NM-HDV2-2T1/E1 with VIC2-4FXS/DID in VIC/VWIC slot. Enables FXS connectivity to analog phones/fax machines and 2 T1 digital trunk access the PSTN and WAN access.
  • This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls
  • Support for 4 to 120 channels with the new PVDM2 and featuring the latest digital signal processing technology
  • The module is Interoperable with the full range of Cisco IP Communications solutions

    • T1 Network Interface:

  • Line Code: AMI, B8ZS
  • AMI Ones Density: Enforced for N x 56 Kbps Channels
  • Framing Format: D4 (SF) and ESF
  • Output level (LBO): 0, -7.5, or -15 dB
  • Input Level: +1dB0 down to -24 dB0
  • DTE Interface (WIC mode): Fractional Service
  • DTE Interface (VIC mode): G.704/Structured
  • DCE Interface: G.704/Structured

    • E1 Network Interface:

  • Data Rate: 1.984 Mbps (framed mode) Per E1 Port
  • Clocking: Internal and Loop (recovered from network)
  • E1 National Bits: Fixed (non-configurable)
  • Encoding: HDB3
  • DTE Interface (WIC mode): Fractional Service
  • DTE Interface (VIC mode): G.704/Structured
  • DCE Interface: G.704/Structured

  • Network module contain four 80-pin SIMM sockets for PVDM2s
  • Toll Bypass Support
  • Telephony Interface Signaling Support
  • Cisco SRST maintains basic telephony services at the branch office even if Wan gCEs down
  • NM-HDV2-2T1/E1 with VIC2-4FXS/DID in VIC/VWIC slot. Enables FXS connectivity to analog phones/fax machines and 2 T1 digital trunk access the PSTN and WAN access.
  • This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls
  • Support for 4 to 120 channels with the new PVDM2 and featuring the latest digital signal processing technology
  • The module is Interoperable with the full range of Cisco IP Communications solutions

    • T1 Network Interface:

  • Line Code: AMI, B8ZS
  • AMI Ones Density: Enforced for N x 56 Kbps Channels
  • Framing Format: D4 (SF) and ESF
  • Output level (LBO): 0, -7.5, or -15 dB
  • Input Level: +1dB0 down to -24 dB0
  • DTE Interface (WIC mode): Fractional Service
  • DTE Interface (VIC mode): G.704/Structured
  • DCE Interface: G.704/Structured

    • E1 Network Interface:

  • Data Rate: 1.984 Mbps (framed mode) Per E1 Port
  • Clocking: Internal and Loop (recovered from network)
  • E1 National Bits: Fixed (non-configurable)
  • Encoding: HDB3
  • DTE Interface (WIC mode): Fractional Service
  • DTE Interface (VIC mode): G.704/Structured
  • DCE Interface: G.704/Structured
System Requirements:

Software and Memory Requirements:

  • Cisco 2600XM:
    • IP Plus images and higher
    • 64 MB DRAM
    • 32 MB Flash
  • Cisco 2691:
    • IP Plus images and higher
    • 128 MB DRAM
    • 32 MB Flash
  • Cisco 3700:
    • IP Plus images and higher
    • 128 MB DRAM
    • 32 MB Flash

    Supported Platforms & Minimum IOS Versions:

  • 3845 - 12.3(11)T
  • 3825 - 12.3(11)T
  • 3745 - 12.3(7)T
  • 3725 - 12.3(7)T
  • 2691 - 12.3(7)T
  • 2600XM Series - 12.3(7)T

    		•
    Compatibility:

    Supported Platforms:

  • 3845
  • 3825
  • 3745
  • 3725
  • 2691
  • 2600XM Series

    		•
    Certifications & Standards:
    • FCC Class B device
    • EMC 47CFR15 Subpart B 2002, T1
    • Safety IEC60950
    • Telecom 47 CFR part 68, TIA/EIA 968-A
    • FCC Class B device
    • EMC 47CFR15 Subpart B 2002, T1
    • Safety IEC60950
    • Telecom 47 CFR part 68, TIA/EIA 968-A

    Cisco NM-HDV2-2T1/E1 Original Manufacturer Warranty

    Standard Warranty: 90 Day Limited