(800)504-7199 United States
(+01)201-526-9500

Your cart is empty

Cisco NPE-G1
Actual item may differ from photo shown. UsedCisco.com does not sell or include licensed software of any kind. All products are tested and reset to factory defaults.

Guaranteed Pre-Owned

what's this?

In stock & ready to ship

Extend Your Warranty

Free
$235.41
$470.83
List Price: $8,341.30
You Save: (72%) $5,987.17
Current Price: $2,354.13
Quantity

This item may qualify for Free Super Saver Shipping!

MFG PART #:

NPE-G1

UC SKU #:

67038

Questions? Post your question instantly!

I need to buy this product!

Loadinganimation

Should we email you when a response is posted?

To continue to meet the increasing needs for performance while maintaining exceptional value and flexibility, the Cisco 7200 Series introduces its newest processor - the NPE-G1. The Cisco 7200 Series Network Processing Engine NPE-G1 (NPE-G1) addresses the demand for performance and flexibility by doubling its processing capacity and enabling unprecedented LAN performance.

Cisco NPE-G1 General Information

Manufacturer: Cisco Systems, Inc
Brand Name: Cisco
Product Series: 7200
Product Name: 7200 Series Network Processing Engine
Product Type: Network Processing Engine

Cisco NPE-G1 Interfaces/Ports

Interfaces/Ports: 3 x 10/100/1000Base-T LAN
Interfaces/Ports Details: 1 x RJ-45 Auxiliary Management
Interfaces/Ports Details: 1 x RJ-45 Console Management
Interfaces/Ports Details: 3 x RJ-45 10/100/1000Base-T LAN

Cisco NPE-G1 Media & Performance

Connectivity Media: Twisted Pair 10/100/1000Base-T
Data Transfer Rate: 100Mbps Fast Ethernet
Data Transfer Rate: 1Gbps Gigabit Ethernet
Data Transfer Rate: 10Mbps Ethernet

Cisco NPE-G1 I/O Expansions

Expansion Slots: 3 x GBIC
Expansion Slots: 1 x PC Card

Cisco NPE-G1 Processor & Chipset

Processor: Broadcom BCM1250 700MHz

Cisco NPE-G1 Memory

Memory: 64MB CompactFlash (CF) Card Installed
Memory: 128MB CompactFlash (CF) Card Upgradeable
Memory: 256MB CompactFlash (CF) Card Upgradeable
Memory: 512KB NVRAM Installed
Memory: 16MB Packet Memory Installed
Memory: 32KB Layer 1 Cache Memory Processor Installed
Memory: 512MB Layer 2 Cache Memory Processor Installed
Memory: 512MB SDRAM Upgradeable
Memory: 1GB SDRAM Upgradeable
Memory: 256MB SDRAM Installed

Cisco NPE-G1 Controls/Indicators

Status Indicators:
  • Link
  • EN (Enable)
  • Slot Active
  • Power On
  • Link
  • EN (Enable)
  • Slot Active
  • Power On

Cisco NPE-G1 Environmental Conditions

Temperature: 41 degrees F (5.0 degrees C) to 104 degrees F (40.0 degrees C) Operating
Temperature: 23 degrees F (-5.0 degrees C) to 131 degrees F (55.0 degrees C) Operating Short Term
Temperature: -38 degrees F (-38.88889 degrees C) to 150 degrees F (65.55556 degrees C) Storage

Cisco NPE-G1 Miscellaneous

Compatibility:
  • The NPE-G1 is supported on the Cisco 7204VXR and Cisco 7206VXR chassis
  • The NPE-G1 is supported on the Cisco 7204VXR and Cisco 7206VXR chassis
Certifications & Standards: Product Regulatory Approvals:
  • Safety and Electromagnetic Emissions
  • Underwriters Laboratories (UL) for the United States
  • Underwriters Laboratories, Canada (cUL) or Canadian Standards Association (CSA)
  • European Norm (EN)
  • International Electrotechnical Commission (IEC)
  • Australia/New Zealand Standard (AS/NZS)

    Product Regulatory Compliance:
  • FCC Part 15 Class A device for electromagnetic interference limits
  • FCC Part 68 for connection to the public telephone network
  • Electrostatic Discharge EN61000-4
  • IEEE 802.1Q standard
    		•

    Cisco NPE-G1 Original Manufacturer Warranty

    Standard Warranty: 90 Day Limited

    Cisco NPE-G1 Environmental Conditions

    Temperature: -40 degrees C (-40.0 degrees F) to 70 degrees C (158.0 degrees F) Storage
    Humidity: 5% to 95% Relative Humidity Storage
    Humidity: 5% to 90% Relative Humidity Operating Short Term
    Humidity: 5% to 85% Relative Humidity Operating
    Altitude: -196.84 ft to 13123.32 ft Operating

    Cisco NPE-G1 Physical Characteristics

    Dimensions: 1.4 Height x 15.15 Width x 11.12 Depth
    Shipping Dimensions: 9.5 Height x 18.5 Width x 20 Depth
    Weight: 3.25 lb
    Shipping Weight: 9.42 lb

    Cisco NPE-G1 Miscellaneous

    Additional Information: Item Included:
  • Two 128MB mem modules (256MB total) for NPE-G1 in 7200 (MEM-NPE-G1-256MB)
  • Cisco 7200 Compact Flash Disk for NPE-G1, 64 MB Option (MEM-NPE-G1-FLD64)
  • Provides performance of up to 1 million packets per second (PPS) in Cisco Express Forwarding (CEF) switching (an increase of up to 250 percent over the Cisco 7200 Series Network Processing Engine NPE-400)
  • Offers three Gigabit Ethernet/Fast Ethernet ports that do not take up bandwidth points
  • Doubles the amount of available DRAM (to 1 GB)
  • Eliminates the requirement for an input/output (I/O) controller
  • Incorporates the functionality (flash memory and auxiliary and console ports) of the I/O controller
  • Eliminates I/O controller LAN interface bandwidth points
  • Provides modular processors and the ability to upgrade
  • Offers improved price performance
  • Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis
  • Full-feature I/O controller functionality
  • Only one port per interface can be used at any one time. For example, for interface Gigabit Ethernet 0/1, either the RJ-45 port can be used or the GBIC port, but not both
  • A total of three ports on any of the three interfaces (0/1, 0/2, or 0/3) can be used at any one time; for example, 0/1 GBIC, 0/2 GBIC, and 0/3 RJ-45
  • There are two DRAM memory slots, so 256 MB of memory consists of two 128 MB memory SODIMMs, 512 MB consists of two 256 MB memory SODIMMs, and 1 GB consists of two 512 MB memory SODIMMs. It is necessary to have the same size SODIMM in each memory bank on an NPE-G1
  • Cisco 7200VXR chassis with an NPE-G1 dCEs not require the use of an I/O controller, an I/O controller can still be used

    The NPE-G1 is supported with the following Cisco 7200 Series I/O controller part numbers:
  • C7200-I/O
  • C7200-I/O-2FE/E
  • C7200-I/O-GE+E

    The NPE-G1 is supported with all port adapters that can be ordered with the Cisco 7200VXR chassis as of August 1, 2002 except for the following:
  • PA-4C-E
  • PA-A2-4T1C-OC3SM
  • PA-A2-4T1C-T3ATM
  • PA-A2-4E1XC-OC3SM
  • PA-A2-4E1XC-E3ATM
  • PA-MCX-2TE1
  • PA-MCX-4TE1
  • PA-MCX-8TE1
  • PA-SRP-OC12MM
  • PA-SRP-OC12SMI
  • PA-SRP-OC12SML
  • PA-SRP-OC12SMX
  • PA-MC-STM-1MM
  • PA-VXA-1TE1-24+
  • PA-VXA-1TE1-30+
  • PA-VXB-2TE1+
  • PA-VXC-2TE1+
    		•
    System Requirements: Software:
  • The NPE-G1 is supported in 12.2(4)BW, 12.2(15)B, 12.2(14)S, 12.2(15)T, 12.1(14)E, and later Cisco IOS releases
    		•