(800)504-7199 United States
(+01)201-526-9500

Your cart is empty

Cisco PA-4T+
Actual item may differ from photo shown. UsedCisco.com does not sell or include licensed software of any kind. All products are tested and reset to factory defaults.

Guaranteed Pre-Owned

what's this?

In stock & ready to ship

Extend Your Warranty

Free
$4.99
$9.98
List Price: $4,500.00
You Save: (99%) $4,450.10
Current Price: $49.90
Quantity

This item may qualify for Free Super Saver Shipping!

MFG PART #:

PA-4T+

UC SKU #:

56908

Questions? Post your question instantly!

I need to buy this product!

Loadinganimation

Should we email you when a response is posted?

Increasing demand for bandwidth-intensive services and wide-area network (WAN) connectivity requires that network administrators maximize the capacity and efficiency of network routers. Cisco Systems' four-port serial port adapter provides network administrators with flexible options for a broad range of port density requirements. Cisco's four-port serial port adapter enhances network performance at a low price per port---making them the most cost-effective solution for maximizing router efficiency.

The four-port adapter (PA-4T+) provides four synchronous serial ports. Each port supports full-duplex operations at T1 and E1 speeds. A single port can support up to E2 speeds.

Each port also supports a variety of interface types, determined by the separately purchased cable type connected to it. Supported interfaces include EIA/TIA-232, EIA/TIA-449, V.35, X.21, and EIA-530, allowing flexible deployments as either DCE or DTE equipment. The four-port adapter is the most cost-effective solution for low-traffic WAN connections or remote Cisco 7200 installations.

Cisco PA-4T+ General Information

Manufacturer: Cisco Systems, Inc
Brand Name: Cisco
Product Name: Serial Port Adapter
Product Type: Port Adapter

Cisco PA-4T+ Interfaces/Ports

Interfaces/Ports: 4 x T1/FT1 WAN
Interfaces/Ports Details: 4 x DB-60 T1/E1 WAN

Cisco PA-4T+ Media & Performance

Connectivity Media: Serial Cable
Data Transfer Rate: 2.048Mbps E1 Full-duplex
Data Transfer Rate: 1.55Mbps T1 Full-duplex

Cisco PA-4T+ Controls/Indicators

Status Indicators:
  • Enable (1 per Port Adapter to indicate enabled hardware)

    Operator indicators LEDs (5 per channel for a total of 20 LEDs per Port Adapter):
  • DTE or DCE function
  • Transmit Data
  • Transmit Clock
  • Receive Data
  • Receive Clock
  • Enable (1 per Port Adapter to indicate enabled hardware)

    Operator indicators LEDs (5 per channel for a total of 20 LEDs per Port Adapter):
  • DTE or DCE function
  • Transmit Data
  • Transmit Clock
  • Receive Data
  • Receive Clock

Cisco PA-4T+ Environmental Conditions

Temperature: 50 degrees F (10.0 degrees C) to 104 degrees F (40.0 degrees C) Operating
Humidity: 10% to 90% Non-condensing

Cisco PA-4T+ Physical Characteristics

Shipping Dimensions: 3 Height x 10 Width x 16 Depth
Shipping Weight: 2 lb

Cisco PA-4T+ Miscellaneous

Additional Information:
  • When two full-duplex ports are in use, the maximum speed for each is 4 Mbps
  • When four full-duplex ports are in use, the maximum speed for each is 1.55 Mbps (T1) or 2.048 Mbps (E1)

    Network interfaces:
  • Four full-duplex ports at T1 (1.55 Mbps) or E1 (2.048 Mbps)
  • Two full-duplex ports at up to 4 Mbps each
  • One full-duplex port at up to E2 speeds (8 Mbps)
  • Electrical interfaces (selectable via cable selection)
    - V.35
    - EIA/TIA-232
    - EIA/TIA-449
    - EIA-530
    - X.21

    Four-port design provides flexibility:
  • Supports four full-duplex T1/E1 connections or a single full-duplex E2 connection
  • All ports use identical 60-pin, D-shell receptacle that supports all interface types (i.e. RS232, RS449, RS530, V.35, x.21)
  • Adapter cables determine the electrical interface and port mode data terminal equipment (DTE) or data communications equipment (DCE)

    Carrier-Class Reliability and Serviceability:
  • Field-replaceable design permits online insertion and removal for continuous router availability
  • Port adapter handles simplify installation and removal
  • Support for loopback for remote diagnostics
  • LEDs indicate when the adapter is enabled for operation
  • Separate LEDs for each port indicate DTE or DCE function, transmit data, transmit clock, receive data, and receive clock signals
  • Metric (M3) thumbscrews included with each port adapter cable allow connections to devices that use metric hardware
  • When two full-duplex ports are in use, the maximum speed for each is 4 Mbps
  • When four full-duplex ports are in use, the maximum speed for each is 1.55 Mbps (T1) or 2.048 Mbps (E1)

    Network interfaces:
  • Four full-duplex ports at T1 (1.55 Mbps) or E1 (2.048 Mbps)
  • Two full-duplex ports at up to 4 Mbps each
  • One full-duplex port at up to E2 speeds (8 Mbps)
  • Electrical interfaces (selectable via cable selection)
    - V.35
    - EIA/TIA-232
    - EIA/TIA-449
    - EIA-530
    - X.21

    Four-port design provides flexibility:
  • Supports four full-duplex T1/E1 connections or a single full-duplex E2 connection
  • All ports use identical 60-pin, D-shell receptacle that supports all interface types (i.e. RS232, RS449, RS530, V.35, x.21)
  • Adapter cables determine the electrical interface and port mode data terminal equipment (DTE) or data communications equipment (DCE)

    Carrier-Class Reliability and Serviceability:
  • Field-replaceable design permits online insertion and removal for continuous router availability
  • Port adapter handles simplify installation and removal
  • Support for loopback for remote diagnostics
  • LEDs indicate when the adapter is enabled for operation
  • Separate LEDs for each port indicate DTE or DCE function, transmit data, transmit clock, receive data, and receive clock signals
  • Metric (M3) thumbscrews included with each port adapter cable allow connections to devices that use metric hardware
System Requirements:
  • The PA-4T+ port adapter requires only a single slot in a Cisco 7200 Series router
  • For Cisco 7500 Series routers, it requires one of the two available adapter slots on a Versatile Interface Processor (VIP2)
  • Requires IOS Release 11.1.8CA (and above) or 11.2.5P (and above)
  • The PA-4T+ port adapter requires only a single slot in a Cisco 7200 Series router
  • For Cisco 7500 Series routers, it requires one of the two available adapter slots on a Versatile Interface Processor (VIP2)
  • Requires IOS Release 11.1.8CA (and above) or 11.2.5P (and above)
Compatibility:
  • Cisco 7200 Series router
  • Cisco 7500 Series router
  • Cisco 7200 Series router
  • Cisco 7500 Series router
Certifications & Standards: Regulatory:
  • FCC Class Limits (FCC 47 CFR Part 15 Subpart B)
  • EN55022 Class Limits
  • UL 1950 D3 Dev.
  • CSA 22.2 Nos. 950
  • TUV-IEC 950
    		•

    Cisco PA-4T+ Original Manufacturer Warranty

    Standard Warranty: 90 Day Limited