We now accept purchase orders on terms. Contact our sales team for approval learn more

(800)504-7199 United States
(+01)201-526-9500

Your cart is empty

Cisco VWIC-2MFT-E1
Actual item may differ from photo shown. UsedCisco.com does not sell or include licensed software of any kind. All products are tested and reset to factory defaults.

Guaranteed Pre-Owned

In stock & ready to ship

Extend Your Warranty

Free
$32.57
$65.13
List Price: $2,000.00
You Save: (84%) $1,674.35
Current Price: $325.65
Average Rating :
N/A
This product has not yet been reviewed.
Quantity

This item may qualify for Free Super Saver Shipping!

MFG PART #:

VWIC-2MFT-E1

UC SKU #:

67562

Questions? Post your question instantly!

I need to buy this product!

Loadinganimation

Should we email you when a response is posted?

This module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a dual-port WAN Interface Card (WIC) for E1 with an integrated DSU. For a packet voice solution, the VWIC provides a dual-port Voice Interface Card (VIC) with integrated DSU, that combines with the Digital E1 Packet Voice Trunk Modules.

Cisco VWIC-2MFT-E1 I/O Expansions

Daughter Cards: Not Applicable

Cisco VWIC-2MFT-E1 Management & Protocols

Management:
  • Telnet/Console:
    • Remote and local configuration, monitoring, and troubleshooting from Cisco IOS Command Line Interface
  • SNMP:
    • Router and DSU/CSU managed by single SNMP agent;router/DSU/CSU appear as single network entity to user
  • SNMP Traps:
    • Generated in response to alarms
  • Telnet/Console:
    • Remote and local configuration, monitoring, and troubleshooting from Cisco IOS Command Line Interface
  • SNMP:
    • Router and DSU/CSU managed by single SNMP agent;router/DSU/CSU appear as single network entity to user
  • SNMP Traps:
    • Generated in response to alarms

Cisco VWIC-2MFT-E1 Controls/Indicators

Status Indicators:
  • LEDs
    • CD (Data Carrier Detect)
    • LP (loopback)
    • AL (Alarm)
  • LEDs
    • CD (Data Carrier Detect)
    • LP (loopback)
    • AL (Alarm)

Cisco VWIC-2MFT-E1 Physical Characteristics

Dimensions: 0.8 Height x 3.1 Width x 4.8 Depth
Weight: 0.12 lb Minimum
Weight: 0.18 lb Maximum

Cisco VWIC-2MFT-E1 Miscellaneous

Additional Information:
  • Transmit Bit Rate:
    • 2.048 Mbps +/- 100 bps/50 PPM
  • Receive Bit Rate:
    • 2.048 Mbps +/- 100 bps/50 PPM
  • Data Rate:
    • 1.984 Mbps (framed mode) Per E1 Port
  • Clocking:
    • Internal and Loop (recovered from network)
  • E1 National Bits:
    • Fixed (non-configurable)
  • Encoding:
    • HDB3
  • DTE Interface (WIC mode):
    • Fractional Service
  • DTE Interface (VIC mode):
    • G.704/structured
  • DCE Interface:
    • G.704/structured

     

  • Data Support WIC mode
  • Voice Support VIC Mode
  • 2 Channel Groups on One Port
  • Management and Diagnostics
  • LAN-to-LAN Routing
  • Voice & Fax Integration
  • VPN & Firewall Solutions
     
  • Transmit Bit Rate:
    • 2.048 Mbps +/- 100 bps/50 PPM
  • Receive Bit Rate:
    • 2.048 Mbps +/- 100 bps/50 PPM
  • Data Rate:
    • 1.984 Mbps (framed mode) Per E1 Port
  • Clocking:
    • Internal and Loop (recovered from network)
  • E1 National Bits:
    • Fixed (non-configurable)
  • Encoding:
    • HDB3
  • DTE Interface (WIC mode):
    • Fractional Service
  • DTE Interface (VIC mode):
    • G.704/structured
  • DCE Interface:
    • G.704/structured

     

  • Data Support WIC mode
  • Voice Support VIC Mode
  • 2 Channel Groups on One Port
  • Management and Diagnostics
  • LAN-to-LAN Routing
  • Voice & Fax Integration
  • VPN & Firewall Solutions
     
System Requirements:
  • 2 channel groups on one port requires Cisco IOS 12.1(1)T or later on the Cisco 2600. It requires 12.1(2)X, 12.1(3)T (Summer 2000) or later releases on Cisco 3620, 3640, and 3660.
  • 2 channel groups on one port supported in Cisco 2600 chassis WIC slots. Not supported on NM-1E2W, NM-2E2W, or NM-1E1R2W. Supported on NM-1FE2W, NM-2FE2W, NM-1E1R2W, and NM-2W.
  • When the 2 channel group mode is enabled only one physical port is supported by the WIC slot. Add/Drop multiplexing is still supported in this mode since only one port terminates on the router.
  • BERT support requires Cisco IOS 12.1(1)T or later releases.
  • V.54 loopback requires Cisco IOS 12.1(1)T or later releases.
  • T1 ESF and SF remote loopback initiation and detection requires Cisco IOS 12.1(2)X, 12.1(3)T (Summer 2000) or later releases.



     
  • 2 channel groups on one port requires Cisco IOS 12.1(1)T or later on the Cisco 2600. It requires 12.1(2)X, 12.1(3)T (Summer 2000) or later releases on Cisco 3620, 3640, and 3660.
  • 2 channel groups on one port supported in Cisco 2600 chassis WIC slots. Not supported on NM-1E2W, NM-2E2W, or NM-1E1R2W. Supported on NM-1FE2W, NM-2FE2W, NM-1E1R2W, and NM-2W.
  • When the 2 channel group mode is enabled only one physical port is supported by the WIC slot. Add/Drop multiplexing is still supported in this mode since only one port terminates on the router.
  • BERT support requires Cisco IOS 12.1(1)T or later releases.
  • V.54 loopback requires Cisco IOS 12.1(1)T or later releases.
  • T1 ESF and SF remote loopback initiation and detection requires Cisco IOS 12.1(2)X, 12.1(3)T (Summer 2000) or later releases.



     
Compatibility:
  • Supported Platforms & Minimum IOS Versions:
    • 3745 - 12.2(8)T
    • 3725 - 12.2(8)T
    • 3660 series - 12.0(7)XK
    • 3640 - 12.0(7)XK
    • 3620 - 12.0(7)XK
    • 2691 - 12.2(8)T1
    • 2600XM Series - 12.2(8)T1
    • 2600 series - 12.0(5)XK
    • 1760 - 12.2(4)YB
    • 1751 - 12.2(4)YB
    • 1721 - 12.2(8)YJ
  • Supported Platforms & Minimum IOS Versions:
    • 3745 - 12.2(8)T
    • 3725 - 12.2(8)T
    • 3660 series - 12.0(7)XK
    • 3640 - 12.0(7)XK
    • 3620 - 12.0(7)XK
    • 2691 - 12.2(8)T1
    • 2600XM Series - 12.2(8)T1
    • 2600 series - 12.0(5)XK
    • 1760 - 12.2(4)YB
    • 1751 - 12.2(4)YB
    • 1721 - 12.2(8)YJ

Cisco VWIC-2MFT-E1 Original Manufacturer Warranty

Standard Warranty: 90 Day Limited

Cisco VWIC-2MFT-E1 General Information

Manufacturer: Cisco Systems, Inc
Brand Name: Cisco
Product Name: Voice/WAN Interface Card
Product Type: Voice/WAN Interface Card

Cisco VWIC-2MFT-E1 Interfaces/Ports

Interfaces/Ports: 2 x E1 WAN
Interfaces/Ports Details: 2 x RJ-48 E1 WAN

Cisco VWIC-2MFT-E1 Media & Performance

Distance Support: Not Applicable
Data Transfer Rate: 2.048Mbps E1

Cisco VWIC-2MFT-E1 I/O Expansions

Expansion Slots: Not Applicable