(800)504-7199 United States
(+01)201-526-9500

Your cart is empty

Cisco WIC-1ENET
Actual item may differ from photo shown. UsedCisco.com does not sell or include licensed software of any kind. All products are tested and reset to factory defaults.

Guaranteed Pre-Owned

what's this?

Limited Availability

why?

Get the latest availability info:

Extend Your Warranty

Available
Available
Available
List Price: $300.00
Our Price: Call us at (800)-504-7199
Average Rating :
N/A
This product has not yet been reviewed.

This item may qualify for Free Super Saver Shipping!

MFG PART #:

WIC-1ENET

UC SKU #:

67479

Q

want to connect 1720 router to cable modem

I have a 1720 router that I want to be able to connect to either a DSL modem or Cable modem vis a eithernet cable. Is the correct card for that option?

Also the router came with a T1 card is that something you would be interested in?

Posted on 11/16/2010 at 09:01AM by Anonymous
A

Yes, the WIC-1ENET card will allow you to connect 1720 router to a DSL or Cable modem with an Ethernet cable.

Posted on 11/18/2010 at 08:47AM by Anton

Post your answer instantly
Loadinganimation

Questions? Post your question instantly!

I need to buy this product!

Loadinganimation

Should we email you when a response is posted?

A Solution for Adding Broadband or Perimeter LAN Connectivity to Your Network

The Cisco Single-Port Ethernet WAN Interface Card (WIC-1ENET) offers customers using a Cisco 1700 series router the option of an additional Ethernet port for enabling broadband Internet access or deployment of a perimeter LAN or demilitarized zone (DMZ). Ideally suited for small and medium businesses and small branch offices, the Ethernet WIC offers a cost-effective method for expanding the capability of the Cisco 1700 series router.

Cisco WIC-1ENET General Information

Manufacturer: Cisco Systems, Inc
Brand Name: Cisco
Product Name: WAN Interface Card (WIC-1ENET)
Product Type: WAN Interface Card (WIC)

Cisco WIC-1ENET Interfaces/Ports

Interfaces/Ports: 1 x 10Base-T LAN
Interfaces/Ports Details: 1 x RJ-45 10Base-T

Cisco WIC-1ENET Media & Performance

Connectivity Media: Twisted Pair
Data Transfer Rate: 10Mbps Ethernet Half/Full-duplex

Cisco WIC-1ENET Management & Protocols

Management:
  • Full integration with Cisco router management tools
  • Full integration with Cisco router management tools
Protocols: VoIP
Protocols: PPPCE
Protocols: PPP

Cisco WIC-1ENET Controls/Indicators

Status Indicators:
  • Indicates valid link for proper operation
  • Full duplex indicates bidirectional data transfers
  • Uses the router front panel activity LED to provide data activity status
  • Indicates valid link for proper operation
  • Full duplex indicates bidirectional data transfers
  • Uses the router front panel activity LED to provide data activity status

Cisco WIC-1ENET Environmental Conditions

Temperature: -4 degrees F (-20.0 degrees C) to 149 degrees F (65.0 degrees C) Storage
Temperature: 32 degrees F (0.0 degrees C) to 104 degrees F (40.0 degrees C) Operating
Humidity: 5% to 95% Non-condensing Relative Humidity Non-operating
Humidity: 10% to 85% Non-condensing Relative Humidity Operating

Cisco WIC-1ENET Physical Characteristics

Dimensions: 0.8 Height x 3.1 Width x 4.8 Depth
Shipping Dimensions: 2 Height x 9.25 Width x 12.3 Depth
Weight: 0.12 lb
Shipping Weight: 0.6 lb

Cisco WIC-1ENET Miscellaneous

Additional Information:
  • Ethernet cables must be purchased separately
  • Ethernet cables must be purchased separately
Compatibility:
  • Cisco 1700 Series Routers
  • Cisco 1700 Series Routers
Certifications & Standards:
  • IEEE 802.3 Ethernet standards

    Safety:
  • UL to UL 1950, third edition
  • C-UL/CSA to CSA 22.2 No. 60950
  • ACA to TS001 - 1997 and AS/NZS 3260
  • CB Certificate to IEC 60950 with all country deviations.

    Electromagnetic Interference (EMI) for the Cisco 1760 router:
  • EN55022 Class A (CISPR 22 Class A) Europe
  • 47 CFR Part 15 Class A US Federal Communications Commission (FCC)
  • ICES 003 Class A
  • VCCI Class A Japan
  • AS/NZS3548 Class A Australia/New Zealand

    Electromagnetic Interference (EMI) for Cisco 1700, 1710, 1720, 1721, 1750, 1751 routers:
  • Federal Communications Commission (FCC) Part 15 Class B
  • Canadian DOC Class B
  • EN55022 Class B
  • VCCI Class B
  • AS/NRZ 3548 Class B

    Immunity for the Cisco 1700 routers:
  • EN 55024
  • EN 55082-1
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-5
  • EN 61000-4-6
  • EN 61000-4-8 (not applicable for most of Cisco equipment)
  • EN 61000-4-11

    Post, Telephone, and Telegraph (PTT) Homologation:
  • USA: FCC Part 68
  • Europe: CTR2, CTR3, CTR12, CTR13, TBR21
  • Canada: Industry Canada CS-03
  • Australia: TS002, TS003, TS016, TS031
  • Japan:-NTT
  • New Zealand: TNA 134, CB-10
  • IEEE 802.3 Ethernet standards

    Safety:
  • UL to UL 1950, third edition
  • C-UL/CSA to CSA 22.2 No. 60950
  • ACA to TS001 - 1997 and AS/NZS 3260
  • CB Certificate to IEC 60950 with all country deviations.

    Electromagnetic Interference (EMI) for the Cisco 1760 router:
  • EN55022 Class A (CISPR 22 Class A) Europe
  • 47 CFR Part 15 Class A US Federal Communications Commission (FCC)
  • ICES 003 Class A
  • VCCI Class A Japan
  • AS/NZS3548 Class A Australia/New Zealand

    Electromagnetic Interference (EMI) for Cisco 1700, 1710, 1720, 1721, 1750, 1751 routers:
  • Federal Communications Commission (FCC) Part 15 Class B
  • Canadian DOC Class B
  • EN55022 Class B
  • VCCI Class B
  • AS/NRZ 3548 Class B

    Immunity for the Cisco 1700 routers:
  • EN 55024
  • EN 55082-1
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-5
  • EN 61000-4-6
  • EN 61000-4-8 (not applicable for most of Cisco equipment)
  • EN 61000-4-11

    Post, Telephone, and Telegraph (PTT) Homologation:
  • USA: FCC Part 68
  • Europe: CTR2, CTR3, CTR12, CTR13, TBR21
  • Canada: Industry Canada CS-03
  • Australia: TS002, TS003, TS016, TS031
  • Japan:-NTT
  • New Zealand: TNA 134, CB-10

Cisco WIC-1ENET Original Manufacturer Warranty

Standard Warranty: 90 Day Limited