•
Guides & Press•
Blog•
FAQ•
Support & Contact•
Sell to Us•
About Us•
Login / My Account
|
The Cisco Catalyst 2948G-GE-TX Gigabit Ethernet Switch is a fixed-configuration switch that provides Gigabit Ethernet connectivity for small and medium-sized networks. The Cisco Catalyst 2948G-GE-TX switch enhances network performance and productivity with the highest 10/100/1000-Mbps port density in a 1 rack unit (RU) form factor in the networking industry. The Cisco Catalyst 2948G-GE-TX is also an affordable solution for delivering gigabit-speed connectivity to the desktop over Category 5 copper cabling. |
Cisco WS-C2948G-GE-TX General Information |
| Manufacturer: Cisco Systems, Inc |
| Brand Name: Cisco |
| Product Line: Catalyst |
| Product Series: 2900 |
| Product Name: Catalyst 2948G Ethernet Switch |
| Product Type: Ethernet Switch |
Cisco WS-C2948G-GE-TX Interfaces/Ports |
| Number of Ports: 48 |
| Gigabit Ethernet Port: Yes |
| Interfaces/Ports: 1 x RJ-45 Console Management |
| Interfaces/Ports: 48 x RJ-45 10/100/1000Base-T LAN |
Cisco WS-C2948G-GE-TX Media & Performance |
| Connectivity Media: Category 4 UTP 10Base-T |
| Connectivity Media: Category 3 UTP 10Base-T |
| Connectivity Media: Category 5 UTP 10/100/1000Base-T |
| Distance Support: 328ft |
| Performance: 20Gbps Forwarding Bandwidth Layer 2 |
| Performance: 29.76Mpps Forwarding Rate for 64-byte Packet |
Cisco WS-C2948G-GE-TX I/O Expansions |
| Number of Expansion Slots: 4 |
| Expansion Slots: (4 Total) SFP (mini-GBIC) |
| Modules: Not Included |
Cisco WS-C2948G-GE-TX Network & Communication |
| Flow Control: IEEE 802.3x (Full-duplex) |
| Layer Support: 2 |
| Address Table: 16K MAC Addresses |
Cisco WS-C2948G-GE-TX Management & Protocols |
| Manageable: Yes |
|
Management:
|
| Protocols: TCP/IP |
| Protocols: DHCP |
| Protocols: RSTP |
| Protocols: LACP |
| Protocols: DTP |
| Protocols: PAgP |
| Protocols: MSTP |
| Protocols: ARP |
| Protocols: CDPv1 |
| Protocols: CDPv2 |
| Protocols: PVST+ |
| Protocols: VTP |
| Protocols: PVRST+ |
| Protocols: Spanning Tree Protocol |
|
Security Features:
|
Cisco WS-C2948G-GE-TX Memory |
| Standard Memory: 64MB |
| Flash Memory: 16MB |
Cisco WS-C2948G-GE-TX Controls/Indicators |
|
Status Indicators:
|
Cisco WS-C2948G-GE-TX Reliability |
| MTBF: 146280Hour |
Cisco WS-C2948G-GE-TX Power Description |
| Input Voltage: 220V AC |
| Input Voltage: 110V AC |
| Input Current: 13A @ 12V DC |
| Frequency: 50 Hz or 60 Hz |
| Power Consumption: 130 W Maximum |
| Power Source: Power Supply |
| Redundant Power Supply: Yes |
Cisco WS-C2948G-GE-TX Environmental Conditions |
| Temperature: 32 degrees F (0.0 degrees C) to 113 degrees F (45.0 degrees C) Operating |
| Temperature: -13 degrees F (-25.0 degrees C) to 158 degrees F (70.0 degrees C) Storage |
| Humidity: 10% to 85% Non-condensing Relative Humidity Operating |
| Altitude: 15000 ft Maximum Storage |
| Altitude: 10000 ft Maximum Operating |
| Thermal Dissipation: 445 BTU/h |
Cisco WS-C2948G-GE-TX Physical Characteristics |
| Form Factor: Desktop |
| Form Factor: Wall-mountable |
| Form Factor: Rack-mountable |
| Dimensions: 1.73 Height x 17.5 Width x 17 Depth |
| Shipping Dimensions: 8.9 Height x 23.6 Width x 23.8 Depth |
| Weight: 13lb |
| Shipping Weight: 21.2 lb |
Cisco WS-C2948G-GE-TX Original Manufacturer Warranty |
| Standard Warranty: Lifetime Limited |
Cisco WS-C2948G-GE-TX Miscellaneous |
|
Additional Information:
|
|
System Requirements:
|
|
Certifications & Standards:
|