•
Guides & Press•
Blog•
FAQ•
Support & Contact•
Sell to Us•
About Us•
Login / My Account
|
Cisco Catalystr 2950G-48 is a member of the Catalyst 2950 Series Intelligent Ethernet Switches, and is a fixed-configuration, stackable switch that provides wire-speed Fast Ethernet and Gigabit Ethernet connectivity for midsized networks and the metro access edge. The Catalyst 2950 Series is an affordable product line that brings intelligent services, such as enhanced security, high availability and advanced quality of service (QoS), tothe network edgewhile maintaining the simplicity of traditional LAN switching. When a Catalyst 2950 Switch is combined with a Catalyst 3550 Series Switch, the solution can enable IP routing from the edge to the core of the network. Embedded in Catalyst 2950 Series switches is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Catalyst desktop switches using a standard Web browser. In addition, Cisco CMS Software provides new configuration wizards that greatly simplify the implementation of converged applications and network-wide services. |
Cisco WS-C2950G-48-EI Media & Performance |
| Connectivity Media: Category 4 UTP 10Base-T |
| Connectivity Media: Category 3 UTP 10Base-T |
| Connectivity Media: Category 5 UTP 10/100Base-TX |
| Performance: Up to 6.8Mbps Forwarding Bandwidth |
| Performance: 13.6Gbps Switching Fabric |
Cisco WS-C2950G-48-EI Controls/Indicators |
|
Status Indicators:
System status LEDs: Per-port status LEDs: |
Cisco WS-C2950G-48-EI Reliability |
| MTBF: 159026Hour |
Cisco WS-C2950G-48-EI Power Description |
| Input Voltage: 220V AC |
| Input Voltage: 110V AC |
| Input Voltage Range: 100V AC to 127V AC |
| Input Current: 1 A @ 100V AC to 127V AC |
| Input Current: 0.5 A @ 200V AC to 240V AC |
| Frequency: 50 Hz to 60 Hz |
| Power Consumption: Up to 45 W |
| Redundant Power Supply: Yes |
Cisco WS-C2950G-48-EI Environmental Conditions |
| Temperature: -13 degrees F (-25.0 degrees C) to 158 degrees F (70.0 degrees C) Storage |
| Temperature: 32 degrees F (0.0 degrees C) to 113 degrees F (45.0 degrees C) Operating |
| Humidity: 10% to 85% Non-condensing Relative Humidity Operating |
| Altitude: 15000 ft Maximum Storage |
| Altitude: 10000 ft Maximum Operating |
| Thermal Dissipation: 154 BTU/h |
Cisco WS-C2950G-48-EI Physical Characteristics |
| Dimensions: 1.72 Height x 17.5 Width x 13 Depth |
| Shipping Dimensions: 8.25 Height x 18.25 Width x 22 Depth |
| Weight: 10lb |
Cisco WS-C2950G-48-EI Miscellaneous |
Additional Information:
|
|
Certifications & Standards:
Safety: Electromagnetic Emissions: Standards: |
Cisco WS-C2950G-48-EI Original Manufacturer Warranty |
| Standard Warranty: Lifetime Limited |
Cisco WS-C2950G-48-EI General Information |
| Manufacturer: Cisco Systems, Inc |
| Brand Name: Cisco |
| Product Line: Catalyst |
| Product Series: 2950 |
| Product Name: Catalyst 2950G-48 Ethernet Switch |
| Product Type: Ethernet Switch |
Cisco WS-C2950G-48-EI Interfaces/Ports |
| Number of Ports: 48 |
| Fast Ethernet Port: Yes |
| Interfaces/Ports: 48 x RJ-45 10/100Base-TX LAN |
| Interfaces/Ports: 1 x RJ-45 Console Management |
Cisco WS-C2950G-48-EI Media & Performance |
| Performance: 10.1Mpps Forwarding Rate for 64-byte Packet |
Cisco WS-C2950G-48-EI I/O Expansions |
| Number of Expansion Slots: 2 |
| Expansion Slots: (2 Total) GBIC |
Cisco WS-C2950G-48-EI Network & Communication |
| Flow Control: IEEE 802.3x (Full-duplex) |
| Address Table: 8K MAC Addresses |
Cisco WS-C2950G-48-EI Management & Protocols |
| Manageable: Yes |
Management:
|
| Protocols: IGMP |
| Protocols: PVST+ |
| Protocols: PAgP |
| Protocols: DTP |
| Protocols: VTP |
| Protocols: TFTP |
| Protocols: NTP |
| Protocols: LACP |
| Protocols: CDP |
Security Features:
|
Cisco WS-C2950G-48-EI Memory |
| Standard Memory: 16MB |
| Flash Memory: 8MB |
Cisco WS-C2950G-48-EI Software |
Operating System:
|