(800)504-7199 United States
(+01)201-526-9500

Your cart is empty

Cisco WS-C3548-XL-EN
Actual item may differ from photo shown. UsedCisco.com does not sell or include licensed software of any kind. All products are tested and updated with the latest manufacturer's firmware.

Certified Pre-Owned

what's this?

In stock & ready to ship

Extend Your Warranty

Free
$12.00
List Price: $240.00
You Save: (50%) $120.00
Today's Price: $120.00
Quantity

This item may qualify for Free Ground Shipping!

MFG PART #:

WS-C3548-XL-EN

UC SKU #:

66178

A single-rack-unit (RU), stackable 10/100 and Gigabit Ethernet switch with 48 10BaseT/100BaseTX ports and two GBIC-based Gigabit Ethernet ports. The Catalyst 3548 XL is ideal for delivering dedicated 10- or 100-Mbps to individual users and servers in high-density workgroups from a stack, cluster, or standalone configuration. Built-in dual GBIC-based Gigabit Ethernet ports provide users with a flexible and scalable solution for Gigabit Ethernet uplinks and GigaStack GBIC stacking

Cisco WS-C3548-XL-EN Interfaces/Ports

Fast Ethernet Port: Yes
Interfaces/Ports: 48 x RJ-45 10/100Base-TX LAN
Interfaces/Ports: 1 x RJ-45 Console Management

Cisco WS-C3548-XL-EN Media & Performance

Connectivity Media: Category 5 Twisted Pair
Distance Support: 328.08ft
Performance: 10.8Gbps Switching Fabric
Performance: Up to 8Mpps Forwarding Rate

Cisco WS-C3548-XL-EN I/O Expansions

Number of Expansion Slots: 2
Expansion Slots: (2 Total) GBIC

Cisco WS-C3548-XL-EN Network & Communication

Address Table: 8192 MAC Addresses

Cisco WS-C3548-XL-EN Management & Protocols

Manageable: Yes
Management:
  • Cisco IOS CLI through the console port or Telnet
  • CiscoView device-management application
  • Cluster Management Suite, a web-based tool for managing switch clusters or an individual switch through a single IP address
  • SNMP
  • Cisco Cluster Management Suite (CMS)
  • Cisco IOS CLI through the console port or Telnet
  • CiscoView device-management application
  • Cluster Management Suite, a web-based tool for managing switch clusters or an individual switch through a single IP address
  • SNMP
  • Cisco Cluster Management Suite (CMS)
Protocols: TFTP
Protocols: ARP
Protocols: NTP
Protocols: STP
Protocols: CDP
Protocols: ISL
Protocols: CGMP
Protocols: DNS

Cisco WS-C3548-XL-EN Memory

Standard Memory: 8MB
Flash Memory: 4MB

Cisco WS-C3548-XL-EN Controls/Indicators

Status Indicators:
  • System
  • RPS
  • STATUS (port status)
  • UTL (utilization)
  • DUPLEX
  • SPEED
  • System
  • RPS
  • STATUS (port status)
  • UTL (utilization)
  • DUPLEX
  • SPEED

Cisco WS-C3548-XL-EN Reliability

MTBF: 150000Hour

Cisco WS-C3548-XL-EN Power Description

Input Voltage: 110V AC
Input Voltage: 220V AC
Input Voltage Range: 100V AC to 127V AC
Frequency: 50 Hz to 60 Hz
Power Consumption: 100 W
Redundant Power Supply: Yes

Cisco WS-C3548-XL-EN Environmental Conditions

Temperature: -4 degrees F (-20.0 degrees C) to 149 degrees F (65.0 degrees C) Storage
Temperature: -10 degrees C (14.0 degrees F) to 65 degrees C (149.0 degrees F) Storage
Temperature: 32 degrees F (0.0 degrees C) to 113 degrees F (45.0 degrees C) Operating
Humidity: 10% to 85% Non-condensing Relative Humidity
Altitude: Up to 15000 ft Storage
Altitude: Up to 14993.44 ft Storage
Altitude: Up to 10000 ft Operating
Altitude: Up to 9842.52 ft Operating

Cisco WS-C3548-XL-EN Physical Characteristics

Color: Black
Dimensions: 1.73 Height x 17.5 Width x 15.34 Depth
Shipping Dimensions: 9 Height x 26 Width x 24 Depth
Weight: 12lb
Shipping Weight: 20 lb

Cisco WS-C3548-XL-EN Miscellaneous

Additional Information:
  • IEEE 802.1p combined with two priority queues on 10/100
  • Up to 250 port-based VLANs per Catalyst 3500 series XL support
  • Support for standards-based IEEE 802.1Q and Cisco ISL VLAN trunking protocols
  • CGMP Fast Leave
  • Bandwidth aggregation through Fast EtherChannel technology or Gigabit EtherChannel
  • Per-port broadcast storm control
  • Hardware-based independent stacking bus delivered through GigaStack GBIC supports multiple stacking options
  • Cisco Switch Clustering technology
  • Cluster wide software administration
  • IEEE 802.3z-compliant 1000BaseSX, 1000BaseLX/LH, and 1000BaseZX physical interface support through a field-replaceable - Gigabit Interface Converter (GBIC)
  • Switch cluster web-based management interface
  • Autosensing on each 10/100 port
  • Autonegotiating on each 10/100 port
  • Default configuration stored in Flash memory
  • Cisco Cluster Management Suite (CMS)
  • Simple Network Management Protocol (SNMP) and Telnet interface support
  • Telnet support for up to five simultaneous sessions
  • Support for CiscoWorks2000 network management software
  • Four groups of embedded Remote Monitoring (RMON) (History, Statistics, Alarm, and Events)
  • Support for all nine RMON groups through use of a switch-port and analyzer port
  • Autoconfiguration
  • Domain Name Services (DNS)
  • Trivial File Transfer Protocol (TFTP)
  • Network Time Protocol (NTP)
  • Address Resolution Protocol (ARP) discovers the MAC address that corresponds to the IP address for any given host on the network
  • Multifunction LEDs per port for port status, half-duplex/full-duplex, and 10BaseT/100BaseT indication as well as - switch-level status LEDs for system, RPS, and bandwidth utilization
  • Command-line interface (CLI)-based management console
  • Cisco Discovery Protocol (CDP)
  • MAC-based port level security
  • Password-protected in-band and out-of-band management
  • User-selectable address learning mode
  • Multilevel security on console access
  • TACACS+ authentication
  • Redundant stacking connections
  • IEEE 802.1D Spanning-Tree Protocol
  • Cisco Uplink Fast technology
  • Cisco 600-watt redundant AC power system option
  • Autonegotiating on each 10/100 port automatically selects half- or full-duplex transmission mode to optimize bandwidth

    Support for Cisco GBIC modules:
  • GigaStack GBIC
  • 1000BaseSX GBIC module
  • 1000BaseLX/LH GBIC module
  • 1000BaseZX GBIC module
  • IEEE 802.1p combined with two priority queues on 10/100
  • Up to 250 port-based VLANs per Catalyst 3500 series XL support
  • Support for standards-based IEEE 802.1Q and Cisco ISL VLAN trunking protocols
  • CGMP Fast Leave
  • Bandwidth aggregation through Fast EtherChannel technology or Gigabit EtherChannel
  • Per-port broadcast storm control
  • Hardware-based independent stacking bus delivered through GigaStack GBIC supports multiple stacking options
  • Cisco Switch Clustering technology
  • Cluster wide software administration
  • IEEE 802.3z-compliant 1000BaseSX, 1000BaseLX/LH, and 1000BaseZX physical interface support through a field-replaceable - Gigabit Interface Converter (GBIC)
  • Switch cluster web-based management interface
  • Autosensing on each 10/100 port
  • Autonegotiating on each 10/100 port
  • Default configuration stored in Flash memory
  • Cisco Cluster Management Suite (CMS)
  • Simple Network Management Protocol (SNMP) and Telnet interface support
  • Telnet support for up to five simultaneous sessions
  • Support for CiscoWorks2000 network management software
  • Four groups of embedded Remote Monitoring (RMON) (History, Statistics, Alarm, and Events)
  • Support for all nine RMON groups through use of a switch-port and analyzer port
  • Autoconfiguration
  • Domain Name Services (DNS)
  • Trivial File Transfer Protocol (TFTP)
  • Network Time Protocol (NTP)
  • Address Resolution Protocol (ARP) discovers the MAC address that corresponds to the IP address for any given host on the network
  • Multifunction LEDs per port for port status, half-duplex/full-duplex, and 10BaseT/100BaseT indication as well as - switch-level status LEDs for system, RPS, and bandwidth utilization
  • Command-line interface (CLI)-based management console
  • Cisco Discovery Protocol (CDP)
  • MAC-based port level security
  • Password-protected in-band and out-of-band management
  • User-selectable address learning mode
  • Multilevel security on console access
  • TACACS+ authentication
  • Redundant stacking connections
  • IEEE 802.1D Spanning-Tree Protocol
  • Cisco Uplink Fast technology
  • Cisco 600-watt redundant AC power system option
  • Autonegotiating on each 10/100 port automatically selects half- or full-duplex transmission mode to optimize bandwidth

    Support for Cisco GBIC modules:
  • GigaStack GBIC
  • 1000BaseSX GBIC module
  • 1000BaseLX/LH GBIC module
  • 1000BaseZX GBIC module
Certifications & Standards: Safety:
  • UL to UL 1950, Third Edition
  • c-UL to CAN/CSA 22.2 No. 950-95, Third Edition
  • TUV/GS to EN 60950 with Amendment A1-A4 and A11
  • ACA/A2LA to AS/NZS 3260 and TS001-1997
  • CB to IEC 60950 with all country deviations
  • NOM to NOM-019-SCFI
  • CE Marking

    EMC:
  • FCC Part 15 Class A
  • EN 55022 Class A (CISPR 22 Class A)
  • VCCI Class A
  • AS/NZS 3548 Class A
  • BSMI
  • CE Marking
  • IEEE 802.3x full duplex on 10Base-T, 100Base-TX, and 1000Base-X ports
  • IEEE 802.1D Spanning-Tree Protocol
  • IEEE 802.1Q VLAN
  • IEEE 802.3z 1000Base-X specification
  • 1000Base-X (GBIC)
  • 1000Base-SX
  • 1000Base-LX/LH
  • IEEE 802.3u 100Base-TX specification
  • IEEE 802.3 10Base-T specification
    		•

    Cisco WS-C3548-XL-EN Original Manufacturer Warranty

    Standard Warranty: Lifetime Limited

    Cisco WS-C3548-XL-EN General Information

    Manufacturer: Cisco Systems, Inc
    Brand Name: Cisco
    Product Line: Catalyst
    Product Series: 3500
    Product Name: Catalyst C3548-XL Ethernet Switch
    Product Type: Ethernet Switch