•
Guides & Press•
Blog•
FAQ•
Support & Contact•
Sell to Us•
About Us•
Login / My Account
|
This Ethernet Switching Module provides wire-speed, port-to-port packet transfer on the Ethernet interfaces. The module can be hot-swapped or added without resetting the Catalyst 5000 family switch. This module contain four telco RJ-21 ports (12 interfaces per connector). |
Cisco WS-X5012 General Information |
| Manufacturer: Cisco Systems, Inc |
| Brand Name: Cisco |
| Product Name: WS-X5012 Ethernet Switching Module |
| Product Type: Switching Module |
Cisco WS-X5012 Interfaces/Ports |
| Interfaces/Ports: 48 x 10Base-T |
| Interfaces/Ports Details: 4 x RJ-21 Connector |
| Interfaces/Ports Details: 48 x RJ-45 Port 10Base-T |
Cisco WS-X5012 Media & Performance |
| Connectivity Media: Category 3 UTP 10Base-T |
| Data Transfer Rate: 10Mbps Ethernet Half/Full-duplex |
Cisco WS-X5012 I/O Expansions |
| Expansion Slots: Not Applicable |
| Daughter Cards: Not Applicable |
Cisco WS-X5012 Management & Protocols |
Management:
|
| Protocols: CDP |
| Protocols: VTP |
Cisco WS-X5012 Controls/Indicators |
Status Indicators:
|
Cisco WS-X5012 Environmental Conditions |
| Temperature: 32 degrees F (0.0 degrees C) to 104 degrees F (40.0 degrees C) Operating |
| Temperature: -40 degrees F (-40.0 degrees C) to 167 degrees F (75.0 degrees C) Non-operating |
| Humidity: 10% to 90% Non-condensing |
Cisco WS-X5012 Physical Characteristics |
| Form Factor: Hot-swappable |
| Dimensions: 1.18 Height x 15.51 Width x 16.34 Depth |
Cisco WS-X5012 Miscellaneous |
Additional Information:
Port Detail: Port Detail: |
|
System Requirements:
This module requires supervisor engine module software release 2.3(1) or later |
|
Compatibility:
Cisco Catalyst 5000 family switches |
Certifications & Standards:
|
Cisco WS-X5012 Original Manufacturer Warranty |
| Standard Warranty: Not Applicable |