|
A variety of switched Ethernet and Fast Ethernet modules enable high-performance desktop connectivity with support for value-added features including multicast, protocol filtering, and quality of service (QoS). With the Catalyst 5000 Family, Cisco provides a cost-effective, switched Ethernet and 10/100 alternative to shared hubs in the wiring closet.
|
|
|
|
Humidity:
10% to 90% Non-condensing Relative Humidity
|
|
|
|
Dimensions:
1.2 Height x 14.4 Width x 16 Depth
|
|
Shipping Dimensions:
7.5 Height x 23 Depth
|
|
Weight:
3 lb to 5 lb
|
|
|
Status Indicators:
- Status
- Link good
- Status
- Link good
|
|
|
|
Temperature:
32 degrees F (0.0 degrees C) to 104 degrees F (40.0 degrees C) Operating
|
|
Temperature:
-40 degrees F (-40.0 degrees C) to 167 degrees F (75.0 degrees C) Storage
|
|
|
|
Shipping Weight:
6.5 lb
|
|
|
Additional Information:
- Refurbished
- No Returns
Frame Processing: - Transparent bridging (802.1d)
Key Feature Summary: - Broadcast Suppression
- ISL
- 802.IQ/P
- Ether- Channel
- Inline Rewrite
- 802.3x Flow Control
- WRED
Features: - IGMP snooping for fast joins and leaves on multicast groups
- Protocol filtering to minimize unnecessary traffic by protocol type (such as block IPX and SAP and RIP broadcasts for IP-only clients)
- Port security to control access and keep unauthorized users off the network
- Dynamic VLANs for automatic VLAN assignment based on user login identity or host MAC address
- QoS with trilevel priority queues on the switching backplane
- Supports any combination of switching modules; modules can be hot-swapped or added as needed without resetting the switch
- Connectivity from switched Ethernet and Fast Ethernet to Fiber Distributed Data Interface (FDDI), Gigabit Ethernet, and ATM backbones
- Wire-speed performance on the Ethernet and Fast Ethernet interfaces
- Superior traffic management with large interface buffers to accommodate bursty traffic
- Four groups of RMON on each port
- Supports multiple active MAC addresses (up to 16,000) per port
- Supports spanning-tree algorithm on logical VLANs for fault-tolerant connectivity
- Capability for any backbone Fast Ethernet interface to support up to 1000 VLANs between Catalyst 5000 Family switching platforms and Cisco routers
- Supports broadcast, multicast, and unicast suppression
- Supports IEEE 802.3u autonegotiation process that allows the switch to negotiate speed (10 or 100 Mbps) or duplex mode (half or full duplex) with an attached device
- Autosenses speed and duplex mode if the attached device dCEs not negotiate with the switch
- Uplink fast convergence for rapid STP convergence on wiring closet uplinks
- Backbone fast convergence for optimum STP convergence in backbone
- Refurbished
- No Returns
Frame Processing: - Transparent bridging (802.1d)
Key Feature Summary: - Broadcast Suppression
- ISL
- 802.IQ/P
- Ether- Channel
- Inline Rewrite
- 802.3x Flow Control
- WRED
Features: - IGMP snooping for fast joins and leaves on multicast groups
- Protocol filtering to minimize unnecessary traffic by protocol type (such as block IPX and SAP and RIP broadcasts for IP-only clients)
- Port security to control access and keep unauthorized users off the network
- Dynamic VLANs for automatic VLAN assignment based on user login identity or host MAC address
- QoS with trilevel priority queues on the switching backplane
- Supports any combination of switching modules; modules can be hot-swapped or added as needed without resetting the switch
- Connectivity from switched Ethernet and Fast Ethernet to Fiber Distributed Data Interface (FDDI), Gigabit Ethernet, and ATM backbones
- Wire-speed performance on the Ethernet and Fast Ethernet interfaces
- Superior traffic management with large interface buffers to accommodate bursty traffic
- Four groups of RMON on each port
- Supports multiple active MAC addresses (up to 16,000) per port
- Supports spanning-tree algorithm on logical VLANs for fault-tolerant connectivity
- Capability for any backbone Fast Ethernet interface to support up to 1000 VLANs between Catalyst 5000 Family switching platforms and Cisco routers
- Supports broadcast, multicast, and unicast suppression
- Supports IEEE 802.3u autonegotiation process that allows the switch to negotiate speed (10 or 100 Mbps) or duplex mode (half or full duplex) with an attached device
- Autosenses speed and duplex mode if the attached device dCEs not negotiate with the switch
- Uplink fast convergence for rapid STP convergence on wiring closet uplinks
- Backbone fast convergence for optimum STP convergence in backbone
|
Compatibility:
- Catalyst 5000 and 5500 Family switches
- Catalyst 5000 and 5500 Family switches
|
Certifications & Standards:
Regulatory Compliance Safety Certifications:UL 1950 EN 60950 CSA-C22.2 No. 950 IEC 950 TS 001 AS/NZS 3260
Electromagnetic Emissions Certifications (with UTP):FCC Class A VCCI Class A (47 CFR, Part 15) EN 55022 Class A CISPR 22 Class A AS/NZS 3548 Class A ICES-003 Class A
Standard Network Protocols:Ethernet: IEEE 802.3, 10BaseT, and 10BaseFLFast Ethernet: IEEE 802.3u, 100BaseTX
|
|
|
|
Standard Warranty:
90 Day Limited
|
|
|
|
Data Transfer Rate:
10Mbps Ethernet Half/Full-duplex
|
|
Data Transfer Rate:
100Mbps Fast Ethernet Half/Full-duplex
|
|
|
|
Management:
Network Management:Ethernet Management Information Bases (MIBs) (RFC 1643) Interface table (RFC 1573)Bridge MIB (RFC 1493)Cisco WorkGroup MIBVLAN Trunking ProtocolCisco Discovery ProtocolRMON MIB (RFC 1757)
|
|
|
|
Memory:
192KB Buffer Memory per 10/100Mbps Port Installed
|
|
|
|
Manufacturer:
Cisco Systems, Inc
|
|
Brand Name:
Cisco
|
|
Product Name:
Catalyst Switching Module
|
|
Product Type:
Switching Module
|
|
|
|
Interfaces/Ports:
24 x 10/100Base-TX LAN
|
|
Interfaces/Ports Details:
24 x RJ-45 10/100Base-TX LAN
|
|
|
|
Connectivity Media:
Category 5 UTP 10/100Base-TX
|
|
Connectivity Media:
100 ohm STP 10/100Base-TX
|
|
Distance Support:
328 ft Category 5 UTP Full-duplex
|
|
Distance Support:
328 ft 100 ohm STP Full-duplex
|